cembn@outlook.com or CEMBN_MARKET@HOTMAIL.COM

LATEST NEWS

Concluded several steps to increase the production of Straw mushroom

2016-11-03 16:17:45

1. Add heating agent: When building up materials, add 1% heating agent which accounts for 1% of dried weight compared with compost to speed up the spawn running.
2. Turn single-face fruiting into double-face one: Put plastic mesh of 20 mesh on bed shelves, then spread materials and inoculate so as to realize simultaneous fruiting both on the bottom of bed and the surface of material, this method could shorten the production cycle and and increase at least 20% of mushroom production.
3. Cover materials on the surface of fungus bed:
A. Earthing: After finding that spawns are fully-grown, cover 1-3cm depth of fire soil or vegetable soil to thicken mushroom bodies. 
B. Cover plant ash: After finding that spawns are fully-grown on the surface of material, scatter 1cm depth of plant ash so as to inhibit the compost from going sour.
4. Apply production promoters:
A. In order to harvest more mushrooms, before sowing, spray Triacontanol holding the concentration of 0.6-0.8mg per kg on compost. 
B. The day after uncovering film or the two days after picking mushrooms, spray 30%, 400 times of Shuganling to make the color of mushroom bodies lighter. When building up materials, add 0.2% of Lvweiba Phytonutrient to help gain weight of mushroom and guarantee the difficulty in opening caps. 
5. Twice inoculations: After picking the first flush of mushroom, pry the material surface loose, thoroughly pour lime water over, scatter strains and cover a thin layer of fermented material again. This method facilitates increasing at least 20%-30% of mushroom production.
图片8
 
 
 
 
 
 

MOST POPULAR